Many people fail to appreciate how much value the services of quality heating and air conditioning contractors provide for people in the United States.
The market in the United States for their services is worth more than $120 billion every year! The industry employs more than 566,000 people to manage all of this demand.
One of the unfortunate reasons that there is so much money in this industry is because of how common residential AC installation mistakes are.
These mistakes can keep people from enjoying the full benefits of their AC system. Avoiding these mistakes can save you time and money and help you enjoy a comfortable temperature in your home.
So what are these most common mistakes, and how can you avoid them? Read on to learn about the most common mistakes people make when installing AC in your home!
1. Choosing the Wrong Size Residential AC System
One of the worst mistakes to make is picking an AC system in Millbrook, AL, that is the wrong size.
If you do this, there is little you can do besides getting a new system of the correct size. But what is so bad about having an AC system that is too large or too small?
If your system is too small, it will not cool your house down as you expect. That means you will have to live with warmer temperatures than you feel comfortable with.
On top of that, the AC system will always be on. That means it will never get a break. The result is that it will experience more problems and require more repairs.
In the long run, the system will wear out faster, requiring you to pay more money for a new one.
On the other hand, you can install an AC system that is too large. So what is the problem there? The main problem with installing an AC system that is too large is that it is more expensive than needed.
You will pay extra when you buy the large AC system. You may also pay extra for your monthly energy bills. Large systems sometimes consume more energy, even when cooling down smaller houses, which can also contribute to the greenhouse effect.
The right AC system will be somewhere in the middle.
It will cool down your house and then turn off to give itself a break. This will help it last longer. It also won’t cost too much to buy and won’t use more energy to run than it needs to.
2. Setting up Poor Drainage When Installing New AC Units
Some AC installation jobs provide inadequate drainage.
Not everybody realizes their AC will create a lot of moisture as it runs. That moisture must be directed away from your home, so it doesn’t build up and interfere with your AC unit.
The unit will not work correctly, and you may also suffer water damage.
A sound drainage system will catch all of the condensation that your AC coil creates. It’ll have a condensation pump and a drain to ensure that the moisture is piped to where it will not cause any harm.
3. Replacing AC Units Without Sealing the Ductwork
Many AC systems depend on a series of ducts to help direct cool air around the home. These ducts need sturdy seals to work correctly. Otherwise, the cool air of your system may leak out.
That can mean that you have some rooms that are too cold and others that are too hot. That is why it is essential to check the ducts at each junction carefully.
There should be a tight seal. Even gaps that look small can affect your AC efficiency dramatically.
4. Exposing the Thermostat to Common AC Issues
If you put the thermostat in the wrong place, it can mess up your AC system.
That is because your thermostat also contains a thermometer that measures the temperature. What do you think happens if you place your thermostat next to the fireplace?
It will read like your home is always too hot, which will mean the AC system will always be on.
If you put your thermostat right next to a vent, it will cool down the thermostat when the system turns on. This will cause the thermostat to act as if the whole house is cool, and the AC will turn off.
5. Placing the Condenser in a Poor Place
The condenser of your AC system cools things down. If it is installed in a warm area of your home, it will consume more energy than it needs to do its job.
The condenser needs to be installed in as cool a place as possible that is away from sunlight.
6. Failing to Provide Regular AC Maintenance
Your AC system needs a clean filter to function well. That means replacing it every few months or so.
Your AC system will also develop fewer problems if it has regular maintenance, saving you time and money in the long run.
7. Overfilling the Air Conditioner When Replacing AC Unties
If you put too much refrigerant in your AC system, it can leak out and damage other system components. This can result in expensive repairs.
Ensure the amount of refrigerant in the system is not too high when a new system is installed. Finding the right installation company can help you avoid all of these problems.
Avoid the Most Common Residential AC Installation Mistakes in Millbrook, AL
Residential AC installation mistakes may be common, but that does not mean you must propagate them.
Spending a little time learning about installation mistakes and how to avoid them is an investment in your financial future. You will enjoy the best performance possible if your AC system is installed correctly.
To learn more about the benefits of careful AC installation or speak with an AC installation expert, get in touch with us here in Millbrook, AL any time!
